UNIVERSAL INPUT SIGNAL ISOLATOR
♦ Microprocessor based Slim & Compact design (22.5 mm width).
♦ Universal Input Like ( RTD, Thermocouple,4‐ 20 mA, 0‐10 VDC)
♦ 1.5 KV 3 Port Isolation(Optical & Galvanic) & 0.25% Accuracy of FSD.
♦ Design as per requirement of IEC & CE Standard.
♦ All Configurations and Calibration from inside keypad or PC Software.
♦ Highly communicative serial (RS 232/485) interface facility.
♦ 24 V DC Transmitter loop power supply with current limiting(Isolated)
♦ Microprocessor based Slim & Compact design (22.5 mm width).
♦ Universal Input Like ( RTD, Thermocouple,4‐ 20 mA, 0‐10 VDC)
♦ 1.5 KV 3 Port Isolation(Optical & Galvanic) & 0.25% Accuracy of FSD.
♦ Design as per requirement of IEC & CE Standard.
♦ All Configurations and Calibration from inside keypad or PC Software.
♦ Highly communicative serial (RS 232/485) interface facility.
♦ 24 V DC Transmitter loop power supply with current limiting(Isolated)
Input Type - Standard : RTD PT100 T/CJ,K,R,S,E,N,T,Lin -4‐ 20 mA, 0‐ 10/5 V DC
Special: : Resi HZ: up to 10 Mohm HZ :‐ up to 2.5 khZ, Mv : 0‐10 / 75 MV
Transmitter Power supply - Standard : Special : 24 V DC @ 30 mA max, isolated , 8V,10 V,12V DC.
Cold junction comp. & Sensor break ind. - Software base Automatic.
Response time - 1 ms to 200 ms default 200 ms.
Accuracy - +/‐ 0.1 % of span for linear & RTD, +/‐0.25 % for T/C.
Input impedance - >330 K for Voltage, mV and T/C, 100 R for current.
1.5 KV AC between - Optical and Galvanic Isolation Provided
Input to Output , Input to power, output to power And TPS
Communication Protocol & method -Modbus RTU RS‐485 / RS‐232 communication.
Progr. parameter & Max Dived Nos. -Baud rate, Parity, Node address, Stop bit & 0‐256 unit.
Output type -Standard :‐ 0/4‐20 mA /0‐ 10VDc Special:‐ 0‐ 1V/2V/5V/10V, DC
Supply voltage -24/ 12 V DC 10 watt maximum.
Dimension -22.5 (W) X 75(H) X 100(D), Din rail mounted, MOC‐ ABS.