MULTI CHANNEL INDICATOR & CONTROLLER
♦ μP Based Power, full & highly reliable controller.
♦ Multiple Universal Input RTD, T/C, 4-20 mA, 0-10 VDC.
♦ 4/8/12/16/20/24 channel Indicators available.
♦ Simultaneous All channel display with input isolation.
♦ 1 nos. Realy & TPS output for each channel.
♦ Microprocessor based powerful & highly reliable process display.
♦ 4/6/8/12/16/20/24 channel option available.
♦ All input are universal like T/C, RTD, linear selection.
♦ Simultaneously display for individual channel in compact size.
♦ All channels are fully Isolated.
♦ All Configurations and calibration from front panel keypad.
♦ High speed communicative serial (RS 232/485) interface.
♦ Transmitter loop power supply with current limit as standard.
♦ Power supply : 230V/110V AC or 24V/12V DC
T/C - K, J, R, S, E, N, T
RTD - Pt-100, Cu53 ( 2wire & 3 wire)
Current - 0 ~ 20mA DC, 4~20mA DC
Voltage - 0-5V/1-5V, 0.5 -2.5V/0- 10 V DC
Special on demand - 0-75/200 mV & 0-1/10V/100/300 V DC
0-75/200 mV 0-100/300V DC Resistence - 0-500 R , 0-1/5/10 K, 1M
Transmitter power supply - 10/12/24 V DC @ 30 mA max, isolated from I/p & O/P
Cold junction comp. & Sensor break ind. - Software base Automatic.
Range limits - As per input range Table.
Accuracy - +/- 0.1 % of span for linear & RTD, +/-0.25 % for T/C.
impedance - >330 K for Voltage ,mV, and T/C, 100 R for current.
Indication - 4 digit PV for ALL input - 0.56” 7 segment RED display
Status indication - LEDs for Communication.
Communication Protocol & Method -Modbus RTU RS-485 / RS-232 communication
Programable parameter & Connectable number -Baud rate, Parity, Node address, stop bit & 0-256 unit.
Wireless communication -GSM/GPRS base mobile (sms) communication.
Set point / High scale / Low scale -Full range as per input selection.
Relay Logic -F.S. high & low alarm , Dead band alarm
Display resolution --1999 to 9999 fully configurable for linear input
Programming of parameters -Through 4 tactile keys
Dimensions Mounting -72x144 /144x144 /261x144 /288x144 & panel mounted.
Supply voltage -110/230 AC , 50/60 Hz.
Power consumption -4 watts maximum.
Operating ambient temperature and humidity - 0~50 °C and humidity : Below 90%, non condensing
