USB TO RS-485 CONVERTOR (SELF POWER)
♦ Small volume, easy installation.
♦ No power supply needed, plug and play.
♦ Single chip (ASIC) USB port to serial port communication.
♦ Transmit distance reach up to 1800M at the rate of 115200bps.
♦ Automatic send data control, auto distinguish and sense direction adopt data transfer.
♦ Auto sense serial signal rate, zero delay automatic transmit.
♦ Small volume, easy installation.
♦ No power supply needed, plug and play.
♦ Single chip (ASIC) USB port to serial port communication.
♦ Transmit distance reach up to 1800M at the rate of 115200bps.
♦ Automatic send data control, auto distinguish and sense direction adopt data transfer.
♦ Auto sense serial signal rate, zero delay automatic transmit.
Standard - RS-485, RS-422
Serial port quantity - 1 RS-485 serial port or RS-485/422 serial port
RS-232 signal - TXD, RXD, GND
RS-485 signal - D+, D-, GND
Interface type - adopt DB9 Male or 5-pin 5.08mm pitch terminal blocks
Transmission distance - 1800m
Direction control - RS-485 direction adopts ADDC (Automatic Data Direction Control)
Load capacity - RS-485 supports 32-point polling environment (customizable 128-point)
Interface protection - 600W surge protection, 15kV electrostatic protection
Standard - USB 1.1, USB 2.0, USB CDC V1.1
Quantity of interfaces - 1 USB interface
USB signal - VCC, DATA+, DATA-, GND
Transmission rate - high speed 480Mbps, full speed 12Mbps
Interface form - USB A-type plug, Female
Transmission distance - 5m
Windows 98/ME/2000/XP/7, Linux v5.0
USB interface power supply, without external power supply
Static power consumption - ≤80mA
Dynamic power consumption (mean value) - ≤150mAOperating temperature - --20~60*C Storage temperature: -25~85*C Relative humidity: 5%～95% (no condensation)
Housing - Housing: plastic Dimension (W x H x D): 33mm×18mm×72mm (cable length 1.5m) Weight: 70g
CE
