RS-485/232/422 TO ETHERNET
♦ Support 3-in-1 RS-232/RS-485/RS-422 serial interface .
♦ Support 10/100M with 300bps-115.2Kbps.
♦ Support TCP, UDP, ARP, ICMP, HTTP and DHCP.
♦ Protocol Support standard TCP/IP SOCKET/Modbus Ethernet Protocol Gateway.
♦ Support Virtual serial driver access and auto connection.
♦ Support Windows network and serial interface configuration mode.
♦ Low consumption design with DIN-Rail or wall mounting installation.
♦ Adopt 32 bits ARM processor.
♦ Support 10/100Base-T(X) self-adaptive Ethernet interface.
♦ Support AUTO MDI/MDIX, which can be connected via crossover cable and straight-through cable.
♦ Support 300bps-115200bps line speed and non-blocking communication.
♦ Support low power consumption mode and high performance mode.
♦ Support TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server and Advanced UDP operating mode.
♦ Support AT command, which is convenient for the secondary development of users.
♦ Support DNS, which can achieve communication via domain name.
♦ Support across gateway and routing communication.
♦ Support virtual serial port drive access mode and automatic connection recovery after network interruption.
♦ Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation.
♦ Support standard TCP/IP SOCKET application access.
♦ TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously.
♦ UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously.
♦ Support Windows configuration tool, serial port, WEB and other configuration forms.
♦ Support local and remote system firmware upgrading.
Standard - 10Base-T, 100Base-TX
Protocol - TCP, UDP, ARP, HTTP, ICMP, DHCP, DNS
Rate - 10/100M automatic flow control, MDI/MDI-X autotunning
Interface quantity - 1
Interface form - RJ45
Duplex mode - full/half duplex mode self-adaption
Operating mode - 4 sessions, support TCP Server, TCP Client, UDP, TCP Auto, Advanced TCP Server and Advanced UDP
Standard - EIA RS-232C, RS-485, RS-422
Quantity of serial port - 1 RS-232 or RS-485/422 serial port
Rate - 10/100M automatic flow control, MDI/MDI-X autotunning
RS-232 signal - D+, D-, GND
RS-422 signal - T+, T-, GND, R+, R-
Baud rate - 300-115200bps
Data bit - 5bit, 6bit, 7bit, 8bit Parity bit: None, Even, Odd, Space, Mark
Stop bit - 1bit, 1.5bit, 2bit
Interface form -RS-232, adopt DB9 mal RS-485/422, adopt 5 pins 5.08mm pitch terminal blocks
Directional control -RS-485 direction adopts data flow automatic control technology
Load capacity - RS-485/422 end supports 32 points polling (customizable 128 points) Pull high/low resistor for RS-485: 4.7kΩ
WEB configuration management, serial port AT command, Windows configuration tool
Classification of User Permissions
Power supply indicator, Ethernet port indicator, serial port indicator
9~48VDC, 3 pins 5.08mm pitch terminal blocks Support reverse polarity protection
No-load - 0.80W@12VDC Full-load - 0.84W@12VDC
Operating temperature range - -40~75*c Storage temperature range: -40~85*c Relative humidity: 5%～95%（no condensation）
Housing - IP40 protection, metal
Installation - wall mounting
Dimension (W x H x D) - 69mm×22mm×100mm
Weight - 240g
EC 61000-4-2 (ESD, Electro-static Discharge) ，Level 3
Air discharge - 8kV
Contact discharge - 69mm×22mm×100mm
Weight - 6kV IEC 61000-4-4 (EFT/B, Electrical Fast Transient/Burst), Level 3
Power supply - 2kV
Ethernet interface - 1kV
Serial port - 1kV IEC 61000-4-5 (Surge), Level 2
Power supply - common mode 2kV, differential mode 1kV
Ethernet interface - 2kV
Serial port - common mode 1kV, differential mode 1kV
Shock - IEC 60068-2-27
Free fall - IEC 60068-2-32
Vibration - IEC 60068-2-6
CE
