RS-232 TO RS-485 SIGNAL REPEATER
♦ Work up to 3000m at the buadrate of 9600bps.
♦ DIN-rail/Wall Mounting Support.
♦ Power 12 to 36VDC 3 input (3 bit terminal block).
♦ Adopt itself adapt interface technique, no use for setup switch.
♦ Adopt ADDC, auto distinguish and data transfer direction.
♦ Can use for RS-485/RS-422 repeater and RS-232 to RS-485/RS-422 converter.
♦ Supply 3000V optic-electrical isolation, 1500W surge protection.
♦ Work up to 3000m at the buadrate of 9600bps.
♦ DIN-rail/Wall Mounting Support.
♦ Power 12 to 36VDC 3 input (3 bit terminal block).
♦ Adopt itself adapt interface technique, no use for setup switch.
♦ Adopt ADDC, auto distinguish and data transfer direction.
♦ Can use for RS-485/RS-422 repeater and RS-232 to RS-485/RS-422 converter.
♦ Supply 3000V optic-electrical isolation, 1500W surge protection.
Standard - EIA RS-232C, RS-485, RS-422
Serial port quantity - 1 RS-232 serial port, 1 RS-485/422 serial port
RS-232 signal - TXD, RXD, GND
RS-485 signal - D+, D-, GND
RS-422 signal - T+, T-, R+, R-, GND
Baud rate - 300bps ~115200bps
Interface type - RS-232 serial port, adopts DB9, Female RS-485/422 serial port, adopt 5-pin 5.08mm pitch terminal blocks
Transmission distance - RS-232 serial port, 15m RS-485/422 serial port, 3000m (9600nps)
Direction control - RS-485 adopts automatic data flow control technology which can detect and control data transmission direction automatically
Load capacity - RS-485 supports 32-point polling environment (128-point could be customized)
Interface protection - 1500W surge protection, 15kV electrostatic protection
Photoelectric isolation - 3000V
Power supply indicator, serial port data sending/receiving indicator
12~36VDC, 3-pin 5.08mm pitch terminal blocks
Static power consumption - ≤150mA Dynamic power consumption - ≤350mA
Operating temperature - -20~75*C Storage temperature - -25~85*C Relative humidity - 5%～95%(no condensation)
Housing - metal, IP30 protection Installation: wall mounting Dimension (W x H x D): 62.4mm×22mm×93mm Weight: 200g
CE
